safety sensors

Safety
modules

Safety control units (ECU)

safety sensors

Safety
modules

Safety control units (ECU)

Low current, full control

Our safety control units are designed to control WIDE Automation pressure-sensitive safety mats, bumpers and safety edges. Thanks to the low resistance of our sensitive sensors, multiple sensitive elements can be connected in series.

 

All WIDE Automation control units are TÜV certified, while the NC95 and NC96 control units also have UL certification.

WACS24R

The peculiar characteristic of this module is the possibility of using devices with only two wires with resistive terminator (standard 8.2Kohm). However, also having an internal terminator it can be connected to traditional 4-wire safety devices.

 

The module is based on the use of safety relays with guided contacts and can be configured both with automatic reset and manual reset. Furthermore, it has an auxiliary signaling output with relay, making both the NA contact and the NC contact available. This output can be configured both in “instant” or “delayed” mode.

centralina-elettronica-wacs24r-wide-automation

WACS24R

centralina-elettronica-wacs24r-wide-automation

The peculiar characteristic of this module is the possibility of using devices with only two wires with resistive terminator (standard 8.2Kohm). However, also having an internal terminator it can be connected to traditional 4-wire safety devices.

 

The module is based on the use of safety relays with guided contacts and can be configured both with automatic reset and manual reset. Furthermore, it has an auxiliary signaling output with relay, making both the NA contact and the NC contact available. This output can be configured both in “instant” or “delayed” mode.

centralina-elettronica-nc95-wide-automation
centralina-elettronica-nc96-wide-automation

NC95

The NC95 safety control unit is a manual reset module, based on the use of guided contact safety relays.

NC96

The NC96 safety control unit is an automatic reset module, based on the use of guided contact safety relays.

NC95

centralina-elettronica-nc95-wide-automation

The NC95 safety control unit is a manual reset module, based on the use of guided contact safety relays.

NC96

centralina-elettronica-nc96-wide-automation

The NC96 safety control unit is an automatic reset module, based on the use of guided contact safety relays.

centralina-elettronica-walr24-wide-automation

WALR24/2A 

The operation of this safety control unit, based on the use of safety relays with guided contacts, can be configured with manual or automatic reset.

WALR24/2A 

centralina-elettronica-warl24-wide-automation

The operation of this safety control unit, based on the use of safety relays with guided contacts, can be configured with manual or automatic reset.